08F / 1008 / SPHD,SPHE / DC01(1.0330) Round steel-Shandong Jufu Steel Group Co., Ltd

Round steel



Location： HOME > عرض المنتج > Carbon Steel > Round steel > 08F / 1008 / SPHD,SPHE / DC01(1.0330) Round steel

Product name:

08F / 1008 / SPHD,SPHE / DC01(1.0330) Round steel

Compared with other ordinary round bars, carbon steel round steel is of higher quality, and has more stringent chemical composition indicators, and carbon steel round steel plays an important role in the work of some deep-drawn products.

INFORMATION PRODUCTS

Product Details

Basic parameters

Payment method

Video

Product display

Product material

Our factory

Product packaging

PACKAGING

Excellent package: Anti-water paper and plastic film+covered by iron sheet+ strapped with min three strappingstrips+fixed on the iron or wooden pallets by strapping stripslt can effectively pratect products from corrosion andvarious climate changes during ocean transportation.

SHIPPING

We have long-term cooperation with many experiericed shipping companies, and we will find the most suitable transportation method for you.

Product application

Product parameters

Product Name	carbon steel round bar
Outer Diameter	6mm-1020mm, or as per requirements
Length	500mm-6000mmor as customer request
Standard	ASME, ASTM, EN, BS, GB, DIN, JIS, etc
Low alloy high strength structure steel	Q295, Q345, Q390, Q420, Q460
Prime Carbon structure steel	10#, 20#, 35#, 45#, 60#, 20Mn, 65Mn, B2, B3, JM20, SH45,S45C, C45 1015 1020 1025 1030 1035 1045 1050
Alloy structure steel	30Mn2, 40Mn2, 27SiMn, 42Crmo,20Cr, 40Cr, 20CrMo, 35CrMo, 20CrMnTi, 30CrMnTi,20MnVB, 20MnTiB, 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V, 45MnV,
Spring Steel	65Mn, 60Si2Mn, 50CrVA
Bearing Steel	GCr15, GCr15GD,55SiMoV

Chemical Composition

Grade	C	Si	Mn	P	S	Cu	Cr	Ni
Cor-ten A	0.12	0.25-0.75	0.20-0.50	0.01-0.2	0.03	0.25-0.55	0.5-1.25	0.65
Cor-ten B	0.16	0.3-0.5	0.8-1.25	0.03	0.03	0.25-0.40	0.4-0.65	≤0.4
SPA-H	0.12	0.2-0.75	0.60	0.07-0.15	0.035	0.25-0.55	0.3-1.25	0.65
9CuPCrNi-A	0.12	0.2-0.75	0.20-0.50	0.07-0.15	0.040	0.25-0.55	0.3-1.25	0.65
Q235NH	0.13	0.10-0.40	0.20-0.60	0.03	0.030	0.25-0.55	0.40-0.80	0.65
Q295NH	0.15	0.10-0.50	0.30-1.00	0.03	0.030	0.25-0.55	0.40-0.80	0.65
Q355NH	0.16	0.5	0.50-1.50	0.03	0.030	0.25-0.55	0.40-0.80	0.65
Q415NH	0.12	0.65	1.10	0.025	0.030	0.20-0.55	0.30-1.25	0.12-0.65
Q460NH	0.12	0.65	1.50	0.025	0.030	0.20-0.55	0.30-1.25	0.12-0.65
Q500NH	0.12	0.65	2.0	0.025	0.030	0.20-0.55	0.30-1.25	0.12-0.65
Q550NH	0.12	0.65	2.0	0.025	0.030	0.20-0.55	0.30-1.25	0.12-0.65
Q265GNH	0.12	0.10-0.40	0.20-0.50	0.07-0.12	0.020	0.2-0.45	0.30-0.65	0.25-0.50
Q295GNH	0.12	0.10-0.40	0.20-0.50	0.07-0.12	0.020	0.25-0.45	0.30-0.65	0.25-0.50
Q310GNH	0.12	0.25-0.75	0.20-0.50	0.07-0.12	0.020	0.25-0.55	0.30-1.25	0.65
Q355GNH	0.12	0.20-0.75	1.00	0.07-0.15	0.020	0.25-0.55	0.30-1.25	0.65
Q345GNHL	0.12	0.25-0.75	0.20-0.50	0.07-0.15	0.035	0.25-0.55	0.30-0.65	0.65
Q295GQR2	0.12	0.10-0.40	0.20-0.50	0.06-0.12	0.020	0.25-0.45	0.30-0.65	0.25-0.5
Q295GQR3	0.12	0.20-0.40	0.25-0.55	0.06-0.12	0.020	0.25-0.50	---	---
Q345NQR2	0.12	0.25-0.75	0.20-0.50	0.06-0.12	0.020	0.25-0.50	0.3-1.25	0.12-0.65
Q345NQR3	0.12	0.20-0.50	0.25-0.70	0.06-0.12	0.020	0.25-0.50	---	---
Q400NQR1	0.12	0.75	1.10	0.025	0.008	0.25-0.55	0.3-1.25	0.12-0.65
Q450NQR1	0.12	0.75	1.50	0.025	0.008	0.25-0.55	0.3-1.25	0.12-0.65
Q500NQR1	0.12	0.75	2.00	0.025	0.008	0.25-0.55	0.3-1.25	0.12-0.65
Q550NQR1	0.16	0.75	2.00	0.025	0.008	0.25-0.55	0.3-1.25	0.65

Product parameters

Carbon content (wt.%)	Microstructure	Properties	Examples
Low-carbon steel	< 0.25	Ferrite, pearlite	Low hardness and cost. High ductility, toughness, machinability and weldability	AISI 304, ASTM A815, AISI 316L
Medium-carbon steel	0.25 – 0.60	Martensite	Low hardenability, medium strength, ductility and toughness	AISI 409, ASTM A29, SCM435
High-carbon steel	0.60 – 1.25	Pearlite	High hardness, strength, low ductility	AISI 440C, EN 10088-3

1. 30% of the advance payment is reserved to support customers and third-party inspectors who fail to pass the acceptance inspection and receive a full refund of the advance payment

2. 30% of the advance payment is for stocking, and the remaining 70% can be paid through a letter of credit (LC)

3. Full weight, full weight, insufficient weight, and 10 times compensation can be signed into the contract. Honest cooperation and mutual profit in steel manufacturing for 15 years. We are committed to becoming your most professional steel supplier and your most trusted partner

Online Consulting

Other popular products

jfsue15318854368@gmail.com

